diff --git a/CHANGELOG b/CHANGELOG
index 87aac4a..198b324 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,4 +1,21 @@
 ======================================================================
+Changes for U-Boot 1.1.3:
+======================================================================
+
+* Patch by Jon Loeliger, 02 Sep 2004:
+  Reset monitor size back to 256 so environment can be written
+  to flash on MPC85xx ADS and CDS releases.
+
+* Patch by Paolo Broggini, 02 Sep 2004:
+  Make BSS clearing on ARM systems more robust
+
+* Patch by Yue Hu and Joe, 01 Sep 2004:
+  - add PCI support for ixp425;
+  - add EEPRO100 suppor tfor ixdp425 board.
+
+* Fix problem with protected sector detection in driver/cfi_flash.c
+
+======================================================================
 Changes for U-Boot 1.1.2:
 ======================================================================
 
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index 09e5fdf..e56f477 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -40,7 +40,7 @@
 
 int
 /**********************************************************/
-board_late_init (void)
+board_post_init (void)
 /**********************************************************/
 {
 	return (0);
@@ -74,3 +74,9 @@
 
 	return (0);
 }
+extern struct pci_controller hose;
+void pci_init_board(void)
+{
+	pci_ixp_init(&hose);
+	return ;
+}
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 0b7de7b..5ad4a0c 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -329,7 +329,7 @@
 	if (s != NULL) {
 		sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
 			s[0], s[1],  s[ 2], s[ 3],
-			s[4], s[5],  s[ 6], s[ 7], 
+			s[4], s[5],  s[ 6], s[ 7],
 			s[8], s[9],  s[10], s[11] );
 		setenv("ethaddr", temp);
 		setenv("E", NULL);
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 851ef84..bde936a 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -168,7 +168,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 78c470d..f348193 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -195,7 +195,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 #if 0
 	/* try doing this stuff after the relocation */
diff --git a/cpu/arm925t/start.S b/cpu/arm925t/start.S
index 134a576..f74064b 100644
--- a/cpu/arm925t/start.S
+++ b/cpu/arm925t/start.S
@@ -203,7 +203,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index 70be4de..cd728c5 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -178,7 +178,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S
index 4f1d9ae..51bd240 100644
--- a/cpu/at91rm9200/start.S
+++ b/cpu/at91rm9200/start.S
@@ -216,7 +216,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr pc,_start_armboot
 
diff --git a/cpu/ixp/Makefile b/cpu/ixp/Makefile
index 41ae689..ba2e589 100644
--- a/cpu/ixp/Makefile
+++ b/cpu/ixp/Makefile
@@ -26,7 +26,7 @@
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= serial.o interrupts.o cpu.o timer.o
+OBJS	= serial.o interrupts.o cpu.o timer.o pci.o
 
 all:	.depend $(START) $(LIB)
 
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
index d4fd823..00264be 100644
--- a/cpu/ixp/cpu.c
+++ b/cpu/ixp/cpu.c
@@ -148,7 +148,9 @@
 }
 
 /* FIXME */
+/*
 void pci_init(void)
 {
 	return;
 }
+*/
diff --git a/cpu/ixp/pci.c b/cpu/ixp/pci.c
new file mode 100644
index 0000000..703be4a
--- /dev/null
+++ b/cpu/ixp/pci.c
@@ -0,0 +1,613 @@
+/*
+ * IXP PCI Init
+ * (C) Copyright 2004 eslab.whut.edu.cn
+ * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <asm/arch/ixp425.h>
+#include <asm/arch/ixp425pci.h>
+
+static void non_prefetch_read (unsigned int addr, unsigned int cmd,
+			       unsigned int *data);
+static void non_prefetch_write (unsigned int addr, unsigned int cmd,
+				unsigned int data);
+static void configure_pins (void);
+static void sys_pci_gpio_clock_config (void);
+static void pci_bus_scan (void);
+static int pci_device_exists (unsigned int deviceNo);
+static void sys_pci_bar_info_get (unsigned int devnum, unsigned int bus,
+				  unsigned int dev, unsigned int func);
+static void sys_pci_device_bars_write (void);
+static void calc_bars (PciBar * Bars[], unsigned int nBars,
+		       unsigned int startAddr);
+
+#define PCI_MEMORY_BUS		0x00000000
+#define PCI_MEMORY_PHY		0x48000000
+#define PCI_MEMORY_SIZE		0x04000000
+
+#define PCI_MEM_BUS		0x40000000
+#define PCI_MEM_PHY		0x00000000
+#define PCI_MEM_SIZE		0x04000000
+
+#define	PCI_IO_BUS		0x40000000
+#define PCI_IO_PHY		0x50000000
+#define PCI_IO_SIZE		0x10000000
+
+struct pci_controller hose;
+
+unsigned int nDevices;
+unsigned int nMBars;
+unsigned int nIOBars;
+PciBar *memBars[IXP425_PCI_MAX_BAR];
+PciBar *ioBars[IXP425_PCI_MAX_BAR];
+PciDevice devices[IXP425_PCI_MAX_FUNC_ON_BUS];
+
+extern void out_8 (volatile unsigned *addr, char val)
+{
+	*addr = val;
+}
+extern void out_le16 (volatile unsigned *addr, unsigned short val)
+{
+	*addr = cpu_to_le16 (val);
+}
+extern void out_le32 (volatile unsigned *addr, unsigned int val)
+{
+	*addr = cpu_to_le32 (val);
+}
+
+extern unsigned char in_8 (volatile unsigned *addr)
+{
+	unsigned char val;
+
+	val = *addr;
+	return val;
+}
+extern unsigned short in_le16 (volatile unsigned *addr)
+{
+	unsigned short val;
+
+	val = *addr;
+	val = le16_to_cpu (val);
+	return val;
+}
+extern unsigned in_le32 (volatile unsigned *addr)
+{
+	unsigned int val;
+
+	val = *addr;
+	val = le32_to_cpu (val);
+	return val;
+}
+
+int pci_read_config_dword (pci_dev_t dev, int where, unsigned int *val)
+{
+	unsigned int retval;
+	unsigned int addr;
+
+	/*address bits 31:28 specify the device 10:8 specify the function */
+	/*Set the address to be read */
+	addr = BIT ((31 - dev)) | (where & ~3);
+	non_prefetch_read (addr, NP_CMD_CONFIGREAD, &retval);
+
+	*val = retval;
+
+	return (OK);
+}
+
+int pci_read_config_word (pci_dev_t dev, int where, unsigned short *val)
+{
+	unsigned int n;
+	unsigned int retval;
+	unsigned int addr;
+	unsigned int byteEnables;
+
+	n = where % 4;
+	/*byte enables are 4 bits active low, the position of each
+	   bit maps to the byte that it enables */
+	byteEnables =
+		(~(BIT (n) | BIT ((n + 1)))) &
+		IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
+	byteEnables = byteEnables << PCI_NP_CBE_BESL;
+	/*address bits 31:28 specify the device 10:8 specify the function */
+	/*Set the address to be read */
+	addr = BIT ((31 - dev)) | (where & ~3);
+	non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
+
+	/*Pick out the word we are interested in */
+	*val = (retval >> (8 * n));
+
+	return (OK);
+}
+
+int pci_read_config_byte (pci_dev_t dev, int where, unsigned char *val)
+{
+	unsigned int retval;
+	unsigned int n;
+	unsigned int byteEnables;
+	unsigned int addr;
+
+	n = where % 4;
+	/*byte enables are 4 bits, active low, the position of each
+	   bit maps to the byte that it enables */
+	byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
+	byteEnables = byteEnables << PCI_NP_CBE_BESL;
+
+	/*address bits 31:28 specify the device, 10:8 specify the function */
+	/*Set the address to be read */
+	addr = BIT ((31 - dev)) | (where & ~3);
+	non_prefetch_read (addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
+	/*Pick out the byte we are interested in */
+	*val = (retval >> (8 * n));
+
+	return (OK);
+}
+
+int pci_write_config_byte (pci_dev_t dev, int where, unsigned char val)
+{
+	unsigned int addr;
+	unsigned int byteEnables;
+	unsigned int n;
+	unsigned int ldata;
+
+	n = where % 4;
+	/*byte enables are 4 bits active low, the position of each
+	   bit maps to the byte that it enables */
+	byteEnables = (~BIT (n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
+	byteEnables = byteEnables << PCI_NP_CBE_BESL;
+	ldata = val << (8 * n);
+	/*address bits 31:28 specify the device 10:8 specify the function */
+	/*Set the address to be written */
+	addr = BIT ((31 - dev)) | (where & ~3);
+	non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
+
+	return (OK);
+}
+
+int pci_write_config_word (pci_dev_t dev, int where, unsigned short val)
+{
+	unsigned int addr;
+	unsigned int byteEnables;
+	unsigned int n;
+	unsigned int ldata;
+
+	n = where % 4;
+	/*byte enables are 4 bits active low, the position of each
+	   bit maps to the byte that it enables */
+	byteEnables =
+		(~(BIT (n) | BIT ((n + 1)))) &
+		IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
+	byteEnables = byteEnables << PCI_NP_CBE_BESL;
+	ldata = val << (8 * n);
+	/*address bits 31:28 specify the device 10:8 specify the function */
+	/*Set the address to be written */
+	addr = BIT (31 - dev) | (where & ~3);
+	non_prefetch_write (addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
+
+	return (OK);
+}
+
+int pci_write_config_dword (pci_dev_t dev, int where, unsigned int val)
+{
+	unsigned int addr;
+
+	/*address bits 31:28 specify the device 10:8 specify the function */
+	/*Set the address to be written */
+	addr = BIT (31 - dev) | (where & ~3);
+	non_prefetch_write (addr, NP_CMD_CONFIGWRITE, val);
+
+	return (OK);
+}
+
+void non_prefetch_read (unsigned int addr,
+			unsigned int cmd, unsigned int *data)
+{
+	REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
+
+	/*set up and execute the read */
+	REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd);
+
+	/*The result of the read is now in np_rdata */
+	REG_READ (PCI_CSR_BASE, PCI_NP_RDATA_OFFSET, *data);
+
+	return;
+}
+
+void non_prefetch_write (unsigned int addr,
+			 unsigned int cmd, unsigned int data)
+{
+
+	REG_WRITE (PCI_CSR_BASE, PCI_NP_AD_OFFSET, addr);
+	/*set up the write */
+	REG_WRITE (PCI_CSR_BASE, PCI_NP_CBE_OFFSET, cmd);
+	/*Execute the write by writing to NP_WDATA */
+	REG_WRITE (PCI_CSR_BASE, PCI_NP_WDATA_OFFSET, data);
+
+	return;
+}
+
+/*
+ * PCI controller config registers are accessed through these functions
+ * i.e. these allow us to set up our own BARs etc.
+ */
+void crp_read (unsigned int offset, unsigned int *data)
+{
+	REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET, offset);
+	REG_READ (PCI_CSR_BASE, PCI_CRP_RDATA_OFFSET, *data);
+}
+
+void crp_write (unsigned int offset, unsigned int data)
+{
+	/*The CRP address register bit 16 indicates that we want to do a write */
+	REG_WRITE (PCI_CSR_BASE, PCI_CRP_AD_CBE_OFFSET,
+		   PCI_CRP_WRITE | offset);
+	REG_WRITE (PCI_CSR_BASE, PCI_CRP_WDATA_OFFSET, data);
+}
+
+/*struct pci_controller *hose*/
+void pci_ixp_init (struct pci_controller *hose)
+{
+	unsigned int regval;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0x00;
+
+	/* System memory space */
+	pci_set_region (hose->regions + 0,
+			PCI_MEMORY_BUS,
+			PCI_MEMORY_PHY, PCI_MEMORY_SIZE, PCI_REGION_MEMORY);
+
+	/* PCI memory space */
+	pci_set_region (hose->regions + 1,
+			PCI_MEM_BUS,
+			PCI_MEM_PHY, PCI_MEM_SIZE, PCI_REGION_MEM);
+	/* PCI I/O space */
+	pci_set_region (hose->regions + 2,
+			PCI_IO_BUS, PCI_IO_PHY, PCI_IO_SIZE, PCI_REGION_IO);
+
+	hose->region_count = 3;
+
+	pci_register_hose (hose);
+
+/*
+ ==========================================================
+ 		Init IXP PCI
+ ==========================================================
+*/
+	REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
+	regval |= 1 << 2;
+	REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
+
+	configure_pins ();
+
+	READ_GPIO_REG (IXP425_GPIO_GPOUTR, regval);
+	WRITE_GPIO_REG (IXP425_GPIO_GPOUTR, regval & (~(1 << 13)));
+	udelay (533);
+	sys_pci_gpio_clock_config ();
+	REG_WRITE (PCI_CSR_BASE, PCI_INTEN_OFFSET, 0);
+	udelay (100);
+	READ_GPIO_REG (IXP425_GPIO_GPOUTR, regval);
+	WRITE_GPIO_REG (IXP425_GPIO_GPOUTR, regval | (1 << 13));
+	udelay (533);
+	crp_write (PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_0_DEFAULT);
+	crp_write (PCI_CFG_BASE_ADDRESS_1, IXP425_PCI_BAR_1_DEFAULT);
+	crp_write (PCI_CFG_BASE_ADDRESS_2, IXP425_PCI_BAR_2_DEFAULT);
+	crp_write (PCI_CFG_BASE_ADDRESS_3, IXP425_PCI_BAR_3_DEFAULT);
+	crp_write (PCI_CFG_BASE_ADDRESS_4, IXP425_PCI_BAR_4_DEFAULT);
+	crp_write (PCI_CFG_BASE_ADDRESS_5, IXP425_PCI_BAR_5_DEFAULT);
+	/*Setup PCI-AHB and AHB-PCI address mappings */
+	REG_WRITE (PCI_CSR_BASE, PCI_AHBMEMBASE_OFFSET,
+		   IXP425_PCI_AHBMEMBASE_DEFAULT);
+
+	REG_WRITE (PCI_CSR_BASE, PCI_AHBIOBASE_OFFSET,
+		   IXP425_PCI_AHBIOBASE_DEFAULT);
+
+	REG_WRITE (PCI_CSR_BASE, PCI_PCIMEMBASE_OFFSET,
+		   IXP425_PCI_PCIMEMBASE_DEFAULT);
+
+	crp_write (PCI_CFG_SUB_VENDOR_ID, IXP425_PCI_SUB_VENDOR_SYSTEM);
+
+	REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
+	regval |= PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS;
+	REG_WRITE (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
+	crp_write (PCI_CFG_COMMAND, PCI_CFG_CMD_MAE | PCI_CFG_CMD_BME);
+	udelay (1000);
+
+	pci_write_config_word (0, PCI_CFG_COMMAND, INITIAL_PCI_CMD);
+	REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
+		   | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE);
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf ("Device  bus  dev  func  deviceID  vendorID \n");
+#endif
+	pci_bus_scan ();
+}
+
+void configure_pins (void)
+{
+	unsigned int regval;
+
+	/* Disable clock on GPIO PIN 14 */
+	READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
+	WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval & (~(1 << 8)));
+	READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
+
+	READ_GPIO_REG (IXP425_GPIO_GPOER, regval);
+	WRITE_GPIO_REG (IXP425_GPIO_GPOER,
+			(((~(3 << 13)) & regval) | (0xf << 8)));
+	READ_GPIO_REG (IXP425_GPIO_GPOER, regval);
+
+	READ_GPIO_REG (IXP425_GPIO_GPIT2R, regval);
+	WRITE_GPIO_REG (IXP425_GPIO_GPIT2R,
+			(regval &
+			 ((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1)));
+	READ_GPIO_REG (IXP425_GPIO_GPIT2R, regval);
+
+	READ_GPIO_REG (IXP425_GPIO_GPISR, regval);
+	WRITE_GPIO_REG (IXP425_GPIO_GPISR, (regval | (0xf << 8)));
+	READ_GPIO_REG (IXP425_GPIO_GPISR, regval);
+}
+
+void sys_pci_gpio_clock_config (void)
+{
+	unsigned int regval;
+
+	READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
+	regval |= 0x1 << 4;
+	WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
+	READ_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
+	regval |= 0x1 << 8;
+	WRITE_GPIO_REG (IXP425_GPIO_GPCLKR, regval);
+}
+
+void pci_bus_scan (void)
+{
+	unsigned int bus = 0, dev, func = 0;
+	unsigned short data16;
+	unsigned int data32;
+	unsigned char intPin;
+
+	/* Assign first device to ourselves */
+	devices[0].bus = 0;
+	devices[0].device = 0;
+	devices[0].func = 0;
+
+	crp_read (PCI_CFG_VENDOR_ID, &data32);
+
+	devices[0].vendor_id = data32 & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK;
+	devices[0].device_id = data32 >> 16;
+	devices[0].error = FALSE;
+	devices[0].bar[NO_BAR].size = 0;	/*dummy - required */
+
+	nDevices = 1;
+
+	nMBars = 0;
+	nIOBars = 0;
+
+	for (dev = 0; dev < IXP425_PCI_MAX_DEV; dev++) {
+
+		/*Check whether a device is present */
+		if (pci_device_exists (dev) != TRUE) {
+
+			/*Clear error bits in ISR, write 1 to clear */
+			REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
+				   | PCI_ISR_PFE | PCI_ISR_PPE |
+				   PCI_ISR_AHBE);
+			continue;
+		}
+
+		/*A device is present, add an entry to the array */
+		devices[nDevices].bus = bus;
+		devices[nDevices].device = dev;
+		devices[nDevices].func = func;
+
+		pci_read_config_word (dev, PCI_CFG_VENDOR_ID, &data16);
+
+		devices[nDevices].vendor_id = data16;
+
+		pci_read_config_word (dev, PCI_CFG_DEVICE_ID, &data16);
+		devices[nDevices].device_id = data16;
+
+		/*The device is functioning correctly, set error to FALSE */
+		devices[nDevices].error = FALSE;
+
+		/*Figure out what BARs are on this device */
+		sys_pci_bar_info_get (nDevices, bus, dev, func);
+		/*Figure out what INTX# line the card uses */
+		pci_read_config_byte (dev, PCI_CFG_DEV_INT_PIN, &intPin);
+
+		/*assign the appropriate irq line */
+		if (intPin > PCI_IRQ_LINES) {
+			devices[nDevices].error = TRUE;
+		} else if (intPin != 0) {
+			/*This device uses an interrupt line */
+			/*devices[nDevices].irq = ixp425PciIntTranslate[dev][intPin-1]; */
+			devices[nDevices].irq = intPin;
+		}
+#ifdef CONFIG_PCI_SCAN_SHOW
+		printf ("%06d    %03d %03d %04d  %08d      %08x\n", nDevices,
+			devices[nDevices].vendor_id);
+#endif
+		nDevices++;
+
+	}
+
+	calc_bars (memBars, nMBars, IXP425_PCI_BAR_MEM_BASE);
+	sys_pci_device_bars_write ();
+
+	REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PSE
+		   | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE);
+}
+
+void sys_pci_bar_info_get (unsigned int devnum,
+			   unsigned int bus,
+			   unsigned int dev, unsigned int func)
+{
+	unsigned int data32;
+	unsigned int tmp;
+	unsigned int size;
+
+	pci_write_config_dword (devnum,
+				PCI_CFG_BASE_ADDRESS_0, IXP425_PCI_BAR_QUERY);
+	pci_read_config_dword (devnum, PCI_CFG_BASE_ADDRESS_0, &data32);
+
+	devices[devnum].bar[0].address = (data32 & 1);
+
+	if (data32 & 1) {
+		/* IO space */
+		tmp = data32 & ~0x3;
+		size = ~(tmp - 1);
+		devices[devnum].bar[0].size = size;
+
+		if (nIOBars < IXP425_PCI_MAX_BAR) {
+			ioBars[nIOBars++] = &devices[devnum].bar[0];
+		}
+	} else {
+		/* Mem space */
+		tmp = data32 & ~IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
+		size = ~(tmp - 1);
+		devices[devnum].bar[0].size = size;
+
+		if (nMBars < IXP425_PCI_MAX_BAR) {
+			memBars[nMBars++] = &devices[devnum].bar[0];
+		} else {
+			devices[devnum].error = TRUE;
+		}
+
+	}
+
+	devices[devnum].bar[1].size = 0;
+}
+
+void sortBars (PciBar * Bars[], unsigned int nBars)
+{
+	unsigned int i, j;
+	PciBar *tmp;
+
+	if (nBars == 0) {
+		return;
+	}
+
+	/* Sort biggest to smallest */
+	for (i = 0; i < nBars - 1; i++) {
+		for (j = i + 1; j < nBars; j++) {
+			if (Bars[j]->size > Bars[i]->size) {
+				/* swap them */
+				tmp = Bars[i];
+				Bars[i] = Bars[j];
+				Bars[j] = tmp;
+			}
+		}
+	}
+}
+
+void calc_bars (PciBar * Bars[], unsigned int nBars, unsigned int startAddr)
+{
+	unsigned int i;
+
+	if (nBars == 0) {
+		return;
+	}
+
+	for (i = 0; i < nBars; i++) {
+		Bars[i]->address |= startAddr;
+		startAddr += Bars[i]->size;
+	}
+}
+
+void sys_pci_device_bars_write (void)
+{
+	unsigned int i;
+	int addr;
+
+	for (i = 1; i < nDevices; i++) {
+		if (devices[i].error) {
+			continue;
+		}
+
+		pci_write_config_dword (devices[i].device,
+					PCI_CFG_BASE_ADDRESS_0,
+					devices[i].bar[0].address);
+		addr = BIT (31 -
+			    devices[i].
+			    device) | (0 << PCI_NP_AD_FUNCSL) |
+			(PCI_CFG_BASE_ADDRESS_0) & ~3;
+		pci_write_config_dword (devices[i].device,
+					PCI_CFG_DEV_INT_LINE, devices[i].irq);
+
+		pci_write_config_word (devices[i].device,
+				       PCI_CFG_COMMAND, INITIAL_PCI_CMD);
+
+	}
+}
+
+
+int pci_device_exists (unsigned int deviceNo)
+{
+	unsigned int vendorId;
+	unsigned int regval;
+
+	pci_read_config_dword (deviceNo, PCI_CFG_VENDOR_ID, &vendorId);
+
+	/* There are two ways to find out an empty device.
+	 *   1. check Master Abort bit after the access.
+	 *   2. check whether the vendor id read back is 0x0.
+	 */
+	REG_READ (PCI_CSR_BASE, PCI_ISR_OFFSET, regval);
+	if ((vendorId != 0x0) && ((regval & PCI_ISR_PFE) == 0)) {
+		return TRUE;
+	}
+	/*no device present, make sure that the master abort bit is reset */
+
+	REG_WRITE (PCI_CSR_BASE, PCI_ISR_OFFSET, PCI_ISR_PFE);
+	return FALSE;
+}
+
+pci_dev_t pci_find_devices (struct pci_device_id * ids, int devNo)
+{
+	unsigned int i;
+	unsigned int devdidvid;
+	unsigned int didvid;
+	unsigned int vendorId, deviceId;
+
+	vendorId = ids->vendor;
+	deviceId = ids->device;
+	didvid = ((deviceId << 16) & IXP425_PCI_TOP_WORD_OF_LONG_MASK) |
+		(vendorId & IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK);
+
+	for (i = devNo + 1; i < nDevices; i++) {
+
+		pci_read_config_dword (devices[i].device, PCI_CFG_VENDOR_ID,
+				       &devdidvid);
+
+		if (devdidvid == didvid) {
+			return devices[i].device;
+		}
+	}
+	return -1;
+}
+#endif	/* CONFIG_PCI */
diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S
index 9240b5c..3b3c868 100644
--- a/cpu/ixp/start.S
+++ b/cpu/ixp/start.S
@@ -159,11 +159,12 @@
 	str     r1, [r2]
 
 	/* make sure flash is visible at 0 */
+#if 0
 	ldr 	r2, =IXP425_EXP_CFG0
 	ldr     r1, [r2]
 	orr     r1, r1, #0x80000000
 	str     r1, [r2]
-
+#endif
 	mov 	r1, #CFG_SDR_CONFIG
 	ldr     r2, =IXP425_SDR_CONFIG
 	str     r1, [r2]
@@ -198,7 +199,7 @@
 	bne	111b
 
 	/* set mode register in sdram */
-	mov	r1, #1
+	mov	r1, #CFG_SDR_MODE_CONFIG
 	str	r1, [r4]
 	DELAY_FOR 0x4000, r0
 
@@ -295,7 +296,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
index 160f889..4f023a5 100644
--- a/cpu/lh7a40x/start.S
+++ b/cpu/lh7a40x/start.S
@@ -187,7 +187,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index b1f6e7e..d74f41f 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -147,7 +147,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
index 52f2c5d..7974344 100644
--- a/cpu/sa1100/start.S
+++ b/cpu/sa1100/start.S
@@ -160,7 +160,7 @@
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	bne	clbss_l
+	ble	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index 4ced810..101eb74 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -1066,10 +1066,22 @@
 			for (j = 0; j < erase_region_count; j++) {
 				info->start[sect_cnt] = sector;
 				sector += (erase_region_size * size_ratio);
-				info->protect[sect_cnt] =
-					flash_isset (info, sect_cnt,
-						     FLASH_OFFSET_PROTECT,
-						     FLASH_STATUS_PROTECT);
+
+				/*
+				 * Only read protection status from supported devices (intel...)
+				 */
+				switch (info->vendor) {
+				case CFI_CMDSET_INTEL_EXTENDED:
+				case CFI_CMDSET_INTEL_STANDARD:
+					info->protect[sect_cnt] =
+						flash_isset (info, sect_cnt,
+							     FLASH_OFFSET_PROTECT,
+							     FLASH_STATUS_PROTECT);
+					break;
+				default:
+					info->protect[sect_cnt] = 0; /* default: not protected */
+				}
+
 				sect_cnt++;
 			}
 		}
diff --git a/drivers/pci.c b/drivers/pci.c
index c477a89..c618f5b 100644
--- a/drivers/pci.c
+++ b/drivers/pci.c
@@ -37,16 +37,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-/*
- *
- */
-
 #define PCI_HOSE_OP(rw, size, type)					\
 int pci_hose_##rw##_config_##size(struct pci_controller *hose, 		\
 				  pci_dev_t dev, 			\
@@ -62,6 +52,7 @@
 PCI_HOSE_OP(write, word, u16)
 PCI_HOSE_OP(write, dword, u32)
 
+#ifndef CONFIG_IXP425
 #define PCI_OP(rw, size, type, error_code)				\
 int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value)	\
 {									\
@@ -82,6 +73,7 @@
 PCI_OP(write, byte, u8, )
 PCI_OP(write, word, u16, )
 PCI_OP(write, dword, u32, )
+#endif	/* CONFIG_IXP425 */
 
 #define PCI_READ_VIA_DWORD_OP(size, type, off_mask)			\
 int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
@@ -150,9 +142,11 @@
 		if (bus >= hose->first_busno && bus <= hose->last_busno)
 			return hose;
 
+	debug ("pci_bus_to_hose() failed\n");
 	return NULL;
 }
 
+#ifndef CONFIG_IXP425
 pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 {
 	struct pci_controller * hose;
@@ -208,6 +202,7 @@
 
 	return (-1);
 }
+#endif	/* CONFIG_IXP425 */
 
 pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
 {
@@ -300,7 +295,7 @@
 	unsigned char pin;
 	int bar, found_mem64;
 
-	DEBUGF ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n",
+	debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n",
 		io, mem, command);
 
 	pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
@@ -454,8 +449,8 @@
 			if (!PCI_FUNC(dev))
 				found_multi = header_type & 0x80;
 
-			DEBUGF("PCI Scan: Found Bus %d, Device %d, Function %d\n",
-			    PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) );
+			debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n",
+				PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) );
 
 			pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
 			pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
diff --git a/include/asm-arm/arch-ixp/ixp425pci.h b/include/asm-arm/arch-ixp/ixp425pci.h
new file mode 100644
index 0000000..9ea3319
--- /dev/null
+++ b/include/asm-arm/arch-ixp/ixp425pci.h
@@ -0,0 +1,312 @@
+/*
+ * IXP PCI Init
+ * (C) Copyright 2004 eslab.whut.edu.cn
+ * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IXP425PCI_H_
+#define _IXP425PCI_H_
+
+#define TRUE	1
+#define FALSE	0
+#define OK	0
+#define ERROR	-1
+#define BOOL	int
+
+#define IXP425_PCI_MAX_BAR_PER_FUNC  6
+#define IXP425_PCI_MAX_BAR (IXP425_PCI_MAX_BAR_PER_FUNC * \
+			    IXP425_PCI_MAX_FUNC_ON_BUS)
+
+enum PciBarId
+{
+	CSR_BAR=0,
+	IO_BAR,
+	SD_BAR,
+	NO_BAR
+};
+
+/*Base address register descriptor*/
+typedef struct
+{
+	unsigned int size;
+	unsigned int address;
+} PciBar;
+
+typedef struct
+{
+	unsigned int bus;
+	unsigned int device;
+	unsigned int func;
+	unsigned int irq;
+	BOOL error;
+	unsigned short vendor_id;
+	unsigned short device_id;
+	/*We need an extra entry in this array for dummy placeholder*/
+	PciBar bar[IXP425_PCI_MAX_BAR_PER_FUNC + 1];
+} PciDevice;
+
+/* Mask definitions*/
+#define IXP425_PCI_TOP_WORD_OF_LONG_MASK	0xffff0000
+#define IXP425_PCI_TOP_BYTE_OF_LONG_MASK	0xff000000
+#define IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK	0x0000ffff
+#define IXP425_PCI_BOTTOM_TRIBYTES_OF_LONG_MASK 0x00ffffff
+#define IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK	0x0000000f
+#define IXP425_PCI_MAX_UINT32			0xffffffff
+
+
+#define IXP425_PCI_BAR_QUERY			0xffffffff
+
+#define IXP425_PCI_BAR_MEM_BASE 0x100000
+#define IXP425_PCI_BAR_IO_BASE	0x000000
+
+/*define the maximum number of bus segments - we support a single segment*/
+#define IXP425_PCI_MAX_BUS  1
+/*define the maximum number of cards per bus segment*/
+#define IXP425_PCI_MAX_DEV  4
+/*define the maximum number of functions per device*/
+#define IXP425_PCI_MAX_FUNC 8
+/* define the maximum number of separate functions that we can
+   potentially have on the bus*/
+#define IXP425_PCI_MAX_FUNC_ON_BUS (1+ IXP425_PCI_MAX_FUNC *	\
+				    IXP425_PCI_MAX_DEV *	\
+				    IXP425_PCI_MAX_BUS)
+/*define the maximum number of BARs per function*/
+#define IXP425_PCI_MAX_BAR_PER_FUNC  6
+#define IXP425_PCI_MAX_BAR (IXP425_PCI_MAX_BAR_PER_FUNC *	\
+			    IXP425_PCI_MAX_FUNC_ON_BUS)
+
+#define PCI_NP_CBE_BESL	 (4)
+#define PCI_NP_AD_FUNCSL (8)
+
+#define REG_WRITE(b,o,v) (*(volatile unsigned int*)((b+o))=(v))
+#define REG_READ(b,o,v)	 ((v)=(*(volatile unsigned int*)((b+o))))
+
+#define PCI_DELAY	500
+#define USEC_LOOP_COUNT 533
+#define PCI_SETTLE_USEC 200
+#define PCI_MIN_RESET_ASSERT_USEC 2000
+
+/*Register addressing definitions for PCI controller configuration
+  and status registers*/
+
+#define PCI_CSR_BASE (0xC0000000)
+/*
+#define PCI_NP_AD_OFFSET       (0x00)
+#define PCI_NP_CBE_OFFSET      (0x04)
+#define PCI_NP_WDATA_OFFSET    (0x08)
+#define PCI_NP_RDATA_OFFSET    (0x0C)
+#define PCI_CRP_OFFSET	       (0x10)
+#define PCI_CRP_WDATA_OFFSET   (0x14)
+#define PCI_CRP_RDATA_OFFSET   (0x18)
+#define PCI_CSR_OFFSET	       (0x1C)
+#define PCI_ISR_OFFSET	       (0x20)
+#define PCI_INTEN_OFFSET       (0x24)
+#define PCI_DMACTRL_OFFSET     (0x28)
+#define PCI_AHBMEMBASE_OFFSET  (0x2C)
+#define PCI_AHBIOBASE_OFFSET   (0x30)
+#define PCI_PCIMEMBASE_OFFSET  (0x34)
+#define PCI_AHBDOORBELL_OFFSET (0x38)
+#define PCI_PCIDOORBELL_OFFSET (0x3C)
+#define PCI_ATPDMA0_AHBADDR    (0x40)
+#define PCI_ATPDMA0_PCIADDR    (0x44)
+#define PCI_ATPDMA0_LENADDR    (0x48)
+#define PCI_ATPDMA1_AHBADDR    (0x4C)
+#define PCI_ATPDMA1_PCIADDR    (0x50)
+#define PCI_ATPDMA1_LENADDR    (0x54)
+#define PCI_PTADMA0_AHBADDR    (0x58)
+#define PCI_PTADMA0_PCIADDR    (0x5C)
+#define PCI_PTADMA0_LENADDR    (0x60)
+#define PCI_PTADMA1_AHBADDR    (0x64)
+#define PCI_PTADMA1_PCIADDR    (0x68)
+#define PCI_PTADMA1_LENADDR    (0x6C)
+*/
+/*Non prefetch registers bit definitions*/
+/*
+#define NP_CMD_INTACK	   (0x0)
+#define NP_CMD_SPECIAL	   (0x1)
+#define NP_CMD_IOREAD	   (0x2)
+#define NP_CMD_IOWRITE	   (0x3)
+#define NP_CMD_MEMREAD	   (0x6)
+#define NP_CMD_MEMWRITE	   (0x7)
+#define NP_CMD_CONFIGREAD  (0xa)
+#define NP_CMD_CONFIGWRITE (0xb)
+*/
+
+/*define the default setting of the AHB memory base reg*/
+#define IXP425_PCI_AHBMEMBASE_DEFAULT 0x00010203
+#define IXP425_PCI_AHBIOBASE_DEFAULT  0x0
+#define IXP425_PCI_PCIMEMBASE_DEFAULT 0x0
+
+/*define the default settings for the controller's BARs*/
+#ifdef IXP425_PCI_SIMPLE_MAPPING
+#define IXP425_PCI_BAR_0_DEFAULT 0x00000000
+#define IXP425_PCI_BAR_1_DEFAULT 0x01000000
+#define IXP425_PCI_BAR_2_DEFAULT 0x02000000
+#define IXP425_PCI_BAR_3_DEFAULT 0x03000000
+#define IXP425_PCI_BAR_4_DEFAULT 0x00000000
+#define IXP425_PCI_BAR_5_DEFAULT 0x00000000
+#else
+#define IXP425_PCI_BAR_0_DEFAULT 0x40000000
+#define IXP425_PCI_BAR_1_DEFAULT 0x41000000
+#define IXP425_PCI_BAR_2_DEFAULT 0x42000000
+#define IXP425_PCI_BAR_3_DEFAULT 0x43000000
+#define IXP425_PCI_BAR_4_DEFAULT 0x00000000
+#define IXP425_PCI_BAR_5_DEFAULT 0x00000000
+#endif
+
+/*Configuration Port register bit definitions*/
+#define PCI_CRP_WRITE BIT(16)
+
+/*ISR (Interrupt status) Register bit definitions*/
+#define PCI_ISR_PSE   BIT(0)
+#define PCI_ISR_PFE   BIT(1)
+#define PCI_ISR_PPE   BIT(2)
+#define PCI_ISR_AHBE  BIT(3)
+#define PCI_ISR_APDC  BIT(4)
+#define PCI_ISR_PADC  BIT(5)
+#define PCI_ISR_ADB   BIT(6)
+#define PCI_ISR_PDB   BIT(7)
+
+/*INTEN (Interrupt Enable) Register bit definitions*/
+#define PCI_INTEN_PSE	BIT(0)
+#define PCI_INTEN_PFE	BIT(1)
+#define PCI_INTEN_PPE	BIT(2)
+#define PCI_INTEN_AHBE	BIT(3)
+#define PCI_INTEN_APDC	BIT(4)
+#define PCI_INTEN_PADC	BIT(5)
+#define PCI_INTEN_ADB	BIT(6)
+#define PCI_INTEN_PDB	BIT(7)
+
+/*PCI configuration regs.*/
+
+#define PCI_CFG_VENDOR_ID	0x00
+#define PCI_CFG_DEVICE_ID	0x02
+#define PCI_CFG_COMMAND		0x04
+#define PCI_CFG_STATUS		0x06
+#define PCI_CFG_REVISION	0x08
+#define PCI_CFG_PROGRAMMING_IF	0x09
+#define PCI_CFG_SUBCLASS	0x0a
+#define PCI_CFG_CLASS		0x0b
+#define PCI_CFG_CACHE_LINE_SIZE 0x0c
+#define PCI_CFG_LATENCY_TIMER	0x0d
+#define PCI_CFG_HEADER_TYPE	0x0e
+#define PCI_CFG_BIST		0x0f
+#define PCI_CFG_BASE_ADDRESS_0	0x10
+#define PCI_CFG_BASE_ADDRESS_1	0x14
+#define PCI_CFG_BASE_ADDRESS_2	0x18
+#define PCI_CFG_BASE_ADDRESS_3	0x1c
+#define PCI_CFG_BASE_ADDRESS_4	0x20
+#define PCI_CFG_BASE_ADDRESS_5	0x24
+#define PCI_CFG_CIS		0x28
+#define PCI_CFG_SUB_VENDOR_ID	0x2c
+#define PCI_CFG_SUB_SYSTEM_ID	0x2e
+#define PCI_CFG_EXPANSION_ROM	0x30
+#define PCI_CFG_RESERVED_0	0x34
+#define PCI_CFG_RESERVED_1	0x38
+#define PCI_CFG_DEV_INT_LINE	0x3c
+#define PCI_CFG_DEV_INT_PIN	0x3d
+#define PCI_CFG_MIN_GRANT	0x3e
+#define PCI_CFG_MAX_LATENCY	0x3f
+#define PCI_CFG_SPECIAL_USE	0x41
+#define PCI_CFG_MODE		0x43
+
+/*Specify the initial command we send to PCI devices*/
+#define INITIAL_PCI_CMD (PCI_CMD_IO_ENABLE	   \
+			 | PCI_CMD_MEM_ENABLE	   \
+			 | PCI_CMD_MASTER_ENABLE   \
+			 | PCI_CMD_WI_ENABLE)
+
+/*define the sub vendor and subsystem to be used */
+#define IXP425_PCI_SUB_VENDOR_SYSTEM 0x00000000
+
+#define PCI_IRQ_LINES		4
+
+#define PCI_CMD_IO_ENABLE	0x0001	/* IO access enable */
+#define PCI_CMD_MEM_ENABLE	0x0002	/* memory access enable */
+#define PCI_CMD_MASTER_ENABLE	0x0004	/* bus master enable */
+#define PCI_CMD_MON_ENABLE	0x0008	/* monitor special cycles enable */
+#define PCI_CMD_WI_ENABLE	0x0010	/* write and invalidate enable */
+#define PCI_CMD_SNOOP_ENABLE	0x0020	/* palette snoop enable */
+#define PCI_CMD_PERR_ENABLE	0x0040	/* parity error enable */
+#define PCI_CMD_WC_ENABLE	0x0080	/* wait cycle enable */
+#define PCI_CMD_SERR_ENABLE	0x0100	/* system error enable */
+#define PCI_CMD_FBTB_ENABLE	0x0200	/* fast back to back enable */
+
+
+/*CSR Register bit definitions*/
+#define PCI_CSR_HOST  BIT(0)
+#define PCI_CSR_ARBEN BIT(1)
+#define PCI_CSR_ADS   BIT(2)
+#define PCI_CSR_PDS   BIT(3)
+#define PCI_CSR_ABE   BIT(4)
+#define PCI_CSR_DBT   BIT(5)
+#define PCI_CSR_ASE   BIT(8)
+#define PCI_CSR_IC    BIT(15)
+
+/*Configuration command bit definitions*/
+#define PCI_CFG_CMD_IOAE BIT(0)
+#define PCI_CFG_CMD_MAE	 BIT(1)
+#define PCI_CFG_CMD_BME	 BIT(2)
+#define PCI_CFG_CMD_MWIE BIT(4)
+#define PCI_CFG_CMD_SER	 BIT(8)
+#define PCI_CFG_CMD_FBBE BIT(9)
+#define PCI_CFG_CMD_MDPE BIT(24)
+#define PCI_CFG_CMD_STA	 BIT(27)
+#define PCI_CFG_CMD_RTA	 BIT(28)
+#define PCI_CFG_CMD_RMA	 BIT(29)
+#define PCI_CFG_CMD_SSE	 BIT(30)
+#define PCI_CFG_CMD_DPE	 BIT(31)
+
+/*DMACTRL DMA Control and status Register*/
+#define PCI_DMACTRL_APDCEN  BIT(0)
+#define PCI_DMACTRL_APDC0   BIT(4)
+#define PCI_DMACTRL_APDE0   BIT(5)
+#define PCI_DMACTRL_APDC1   BIT(6)
+#define PCI_DMACTRL_APDE1   BIT(7)
+#define PCI_DMACTRL_PADCEN  BIT(8)
+#define PCI_DMACTRL_PADC0   BIT(12)
+#define PCI_DMACTRL_PADE0   BIT(13)
+#define PCI_DMACTRL_PADC1   BIT(14)
+#define PCI_DMACTRL_PADE1   BIT(15)
+
+/* GPIO related register */
+#undef IXP425_GPIO_GPOUTR
+#undef IXP425_GPIO_GPOER
+#undef IXP425_GPIO_GPINR
+#undef IXP425_GPIO_GPISR
+#undef IXP425_GPIO_GPIT1R
+#undef IXP425_GPIO_GPIT2R
+#undef IXP425_GPIO_GPCLKR
+
+#define IXP425_GPIO_GPOUTR	0xC8004000
+#define IXP425_GPIO_GPOER	0xC8004004
+#define IXP425_GPIO_GPINR	0xC8004008
+#define IXP425_GPIO_GPISR	0xC800400C
+#define IXP425_GPIO_GPIT1R	0xC8004010
+#define IXP425_GPIO_GPIT2R	0xC8004014
+#define IXP425_GPIO_GPCLKR	0xC8004018
+
+#define READ_GPIO_REG(addr,val) \
+		(val) = *((volatile int *)(addr));
+#define WRITE_GPIO_REG(addr,val) \
+		*((volatile int *)(addr)) = (val);
+
+#endif
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 874e962..1c11c6f 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -264,7 +264,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index d4cba33..3dd4957 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -248,7 +248,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024) /* Reserve 512 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 49518d8..379a12c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -248,7 +248,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024) /* Reserve 512 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index d58e6a7..7271737 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -267,7 +267,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 3f2026e..1add778 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -56,17 +56,20 @@
 
 #define CONFIG_BAUDRATE         115200
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_ELF | CFG_CMD_PCI)
 
+#define CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 /* These are u-boot generic parameters */
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY        3
-#define CONFIG_ETHADDR          08:00:3e:26:0a:5b
-#define CONFIG_NETMASK          255.255.0.0
+/*#define CONFIG_ETHADDR          08:00:3e:26:0a:5b*/
+#define CONFIG_NETMASK          255.255.255.0
 #define CONFIG_IPADDR           192.168.0.21
-#define CONFIG_SERVERIP         192.168.0.250
+#define CONFIG_SERVERIP         192.168.0.148
 #define CONFIG_BOOTCOMMAND      "bootm 50040000"
 #define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
 #define CONFIG_CMDLINE_TAG
@@ -147,7 +150,8 @@
 /*
  * SDRAM settings
  */
-#define CFG_SDR_CONFIG			0xd
+#define CFG_SDR_CONFIG		0xd
+#define CFG_SDR_MODE_CONFIG	0x1
 #define CFG_SDRAM_REFRESH_CNT 	0x81a
 
 /*
diff --git a/include/version.h b/include/version.h
index 9098055..2b9b617 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 1.1.2"
+#define	U_BOOT_VERSION	"U-Boot 1.1.3"
 
 #endif	/* __VERSION_H__ */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 6f8c7fe..a74fee1 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -341,7 +341,10 @@
 #ifdef BOARD_LATE_INIT
 	board_late_init ();
 #endif
-
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+	puts ("Net:   ");
+	eth_initialize(gd->bd);
+#endif
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;) {
 		main_loop ();